14 Years Factory wholesale Low Noise for Auckland Manufacturer

Our commission is to serve our users and clients with best quality and competitive portable digital products for 14 Years Factory wholesale Low Noise for Auckland Manufacturer, We invites you and your enterprise to thrive together with us and share a bright future in global market.

Low Noise Trimmer Line

Product Description

 Product: Twist Nylon Trimmer Line
 Grade: Low Noise Grade
 Material: 100% NEW NYLON
 Diameter: 1.3mm/0.050″, 1.6mm/0.065″, 2.0mm/0.080″, 2.4mm/0.095″, 2.7mm/0.105″, 3.0mm/0.120″, 3.3mm/0.130″, 3.5mm/0.138″, 4.0mm/0.158″. 4.5mm/0.177”.
 Length/ Weight:  15m/ 0.5LB/ 1LB/ 3LB/ 5LB/ 10LB/ 20LB or nominated length
 Colour: Yellow, Orange, Red, Green, Nature, Black, or Any Colour on Demand
  • Card Head;
  • Blister Donuts;
  • Spool;
  • Blister Card;
  • Roll in PP bag;
 Shape: Square Twist/ Round Twist



  • Significant improvement in energy efficiency.
  • Quieter work & Reducing noise pollution.
  • Up to 50% noise reduction in larger diameter lines.
  • Accept OEM orders


Product Photo

IMG_8623 IMG_8590 IMG_8651 IMG_8736 IMG_8721

Packing & Shape


  • Previous:
  • Next:
    • Others

      Should you need any product or have any question, please do not be hesitate to contact with us.

    • Shipping

      Shipment: All goods can be delivered by Sea and By air or according to your request. Loading Port: Ningbo or Shanghai, China

    • Payment Terms

      Payment terms: TT: 30% deposit and left pay after receive the copy of BL within 7 days

    • Delivery Time

      Sample lead time: about 1-2 days Mass production lead time: about 25 days after getting the deposit

    - First choice for internal grooving and recessing
    – For all ISO material groups
    – Internal grooves with a diameter starting from Dmin = 16 mm
    – Grooving to a depth of Tmax = 9.5 mm
    – Insert widths of 2, 3 and 4 mm
    – For use with all lathes
    – Can be used up to a maximum coolant pressure of 80 bar

    – Grooving boring bar G1221-P
    – Precision coolant via the top clamp
    – Re-sealable axial cooling bore for blind-hole machining
    – Connection using K601 coolant set (G1/8” thread on shank) or installation, e.g. using a Weldon type adaptor
    – Flexible O-ring seal for leakage-free coolant transfer between the tool and base adaptor
    - Two clamping surfaces
    – Right-hand and left-hand versions available

    - Interface between base adaptor and tool free from pressure loss thanks to O-ring seal
    – Optimal surface quality, process reliability and chip evacuation
    – Tool can be used in normal or overhead position
    – Superlative machining results thanks to optimal L ×D ratio

    Ducklings getting out today to their side of the pen, the barn is getting too small and way too warm for them with this heat wave we’ve got going on right now.

    By noon it was already over 30°C, inside the barn is over 25°C without heat lamps the ducklings are big enough now to spend the days out side, they can come in at night to be safe from the small owls I’ve got here.

    The amount of feces in the mornings in the barn is over the top with them in the barn 24/7 they need to get out side and spread it out instead of all of it in the barn.

    The goslings are getting more and more calm with me picking them up, the Chinese gosling though makes a crap load of noise, but is calm and not trying to break free from my hands.

    Midget duck is amazing he can weave between everyone so well, but he is seriously a small duck some of the ducks his same age are 10 times bigger.

    Because Dug and I have got the ducklings so use to us we have to walk in slow motion around them to make sure we don’t accidently step on one, they won’t move to get out of the way.

    Built a new ramp for the barn entrance, the old steps just weren’t cutting it for this many ducks, bent some wire I had left over and it seems to work great, no one is getting stampeded now going into the barn.

    Had to put the grid shelters in the pen up on cement blocks the ducklings were getting stuck in the 4 inch grid holes.

    This weekend is going to be another attempt at a Muscovy hatch, I’ve got a tray of 63 eggs due to go into the hatcher, but I’m going to put them in the bottom of the killer incubator and hope for the best.

    I wasn’t going to but I ended up candling the Muscovy eggs before I transferred them to the hatching trays and all of the eggs had air sacks, so hopefully we get more than 6 Muscovy ducklings this weekend.

    Midget Duckling got moved to the back room with the Muscovy Ducklings, he was just too small to be with the rest of the flock, first he had to be clean up though.


    ————————– -
    Help Feed The Ducks
    Donate or Subscribe via PayPal to help feed the ducks on the Duck Adventure on YouTube with this link: http://www.50DucksInAHotTub.com

    You can also help feed the Ducks on this YouTube Adventure by purchasing your own pair of PivotHead HD Video Glasses using this link http://pivothead.com/products?a_aid=52d86bb18c650

    Or become an PivotHead affiliate dealer & still support the Duck Adventure on YouTube by using this link to sign up to become an affiliate and earn commission on referrals http://pivothead.postaffiliatepro.com/affiliates/signup.php?a_aid=52d86bb18c650