Factory supplied Fencing Wire for Chile Manufacturer

We know that we only thrive if we can guarantee our combined price competiveness and quality advantageous at the same time for Factory supplied Fencing Wire for Chile Manufacturer, We are sincerely looking forward to establishing good cooperative relationships with customers from at home and abroad for creating a bright future together.


Judin Polyester Wire Introduction

  70112161641

Judin Wire:

Judin wires are specially designed monofilaments to substitute the use of conventional steel cables and wire for farming, agriculture, vineyards, orchards, culture under cover, wind breakers, green houses ( shading and roofing), safe fences for animal husbandry, cover for dams and ponds, marine cultures and variety of other applications.

Judin wires are produce with Nylon and Polyester and the advantages they offer are listed below. One would choose between the 2 based on the area of usage. Most of the advantages these lines offer over the conventional metal cables are the same with a few significant differences making them the preferred choices for certain applications.

  • Judin wires are lighter than steel cables making handling much easier than steel cables resulting in a much easier and faster installation than steel cables.
  • Once the Judin wire is properly tensioned it requires no maintenance and does not sag further because of the low stretch factor of PET.
  • Judin wires are highly U.V and weather stabilized. The wire does not degrade from exposure to sunlight and requires no maintenance in even extreme weather conditions.
  •  One of the many advantages of the line is its stability against extreme temperatures which prevents melting and damage to the plastic film covering used in greenhouses to prevent frost damage to plants.
  • Judin wire does not rust and are non corrosive. The Judin wire exhibits good resistance to chemicals and fertilizers and hence lasts longer.
  • Judin wire does not damage plants, animals or the environment.
  • One of the other advantages of using this wire is that it does not conduct electricity or currents making it a safe alternative in case of lightening.
  •  PET Judin wire exhibits lower elongation and lower water, humidity or moisture absorption making it the preferred wire for many applications.

 

Product Advantage 

EASY INSTALLATION;
EASY TO HANDLE;
LESS MAINTENANCE;
MANIPULATION OF FOLIAGE;
LESS CLIPS OR STAPLES;
SUITABLE FOR USE WITH NEW TECHNOLOGY;
NO CORROSION;
EASY TO REPAIR;
NEUTRAL TO TEMP;
Judin WIRE SPECIFICATION;

DIAMETER

COLOUR

LOAD

ELONGATION

METERAGE

mm

 

Kgs

IN %

Mtrs/ KG

2.20

BLACK

160

17

190

2.20

TRANSPARENT

160

17

190

2.50

BLACK

200

17

145

2.50

TRANSPARENT

200

17

145

3.00

BLACK

300

17

100

3.50

BLACK

385

17

75

4.00

BLACK

480

17

55

Please show us your requirement.

  • Previous:
  • Next:
    • Others

      Should you need any product or have any question, please do not be hesitate to contact with us.

    • Shipping

      Shipment: All goods can be delivered by Sea and By air or according to your request. Loading Port: Ningbo or Shanghai, China

    • Payment Terms

      Payment terms: TT: 30% deposit and left pay after receive the copy of BL within 7 days

    • Delivery Time

      Sample lead time: about 1-2 days Mass production lead time: about 25 days after getting the deposit




  • Edgeit Pro Converts your string timer into a laser accurate edger, perfect plane trimmer and a quick clean up blower! Extend the life of your trimmer line and get better, faster results every time. Only at Power Mower Sales. http://www.powermowersales.com/

    SPECIFICATION

    JUST3280PET

    INJECTION UNIT

    Screw Diameter

    mm

    75

    Screw L/D Ratio

    L/D

    25

    Shot Size(Theoretical)

    cm3

    1502

     Injection Weight(PS)

    g

    1590

    Injection Rate

    g/s

    350

    Plasticizing Capacity

    g/d

    71

    Injection Pressure

    Mpa

    146

    Screw Speed

    rpm

    0~160

    CLAMPING UNIT

    Clamp Tonnage

    KN

    3280

    Toggle Stroke

    mm

    670

    Space Between Tie Bars

    mm

    660×660

    Max. Mold Height

    mm

    680

    Max. Mold Height

    mm

    240

    Ejector Stroke

    mm

    160

    Ejector  Tonnage

    KN

    65

    Ejector  Number

    Piece

    13

    OTHERS

    Max. Pump Pressure

    Mpa

    16

    Pump Motor Power

    KW

    37

    Heater Power

    KW

    23.8

    Machine Dimensions(L×W×H)

    m

    6.9×1.7×2.5

    Machine Weight

    t

    12

    Hopper Capacity

    L

    50

    Oil Tank Capacity

    L

    730

    Platen Dimensions Face

     图片1

    Platen Dimensions Side

     图片2

    Machine Dimensions

     图片3

    About products

    Control System
    1.TFT LCD color display2.Useing high-speed DSP processors, time-control precision up to 1ms3. High-precision displacement sensor system, the control precision of ± 0.2mm4. Using  fuzzy forecasting techniques, temperature control accuracy of ± 1 ℃5.Multi-channel input / output ports, port function can be configured

    6.With output programmable function

    7.Support USB and network interface (optional)

    8. Parameter date protection locks, and auto-save feature with the power

    9.Super-capacity data storage capabilities

    图片3

    Injection Device Clamping Device
    1. Double cylinder balanced injection system2.Double cylinder beach move (above medium machine)3.Multi-step injection pressure of injection / speed & positioning      control4.Multi-step pressure of injection/ speed & positioning control5.High torque oil motor drive screw preplastication device

    6.Screw flow-extend protection device

    7.The temperature of barre is controlled by computer PID

    8.Ceramic heating barrel device

    9.Cooling temperature control system for barrel outet

    10, Screw speed detection device (optional)

    1.Oblique-row double toggle mechanical mold clamping mechanism2. Siamesefront-link overall casting3.Mechanical, hydraulic, electrical full interlock protection (above medium     machine)4.Low-pressure mold protection device5.Multi-step clamping pressure / speed & position control

    6.Multiple hydraulic  ejector device

    7.High speed mold clamping device

    8. Mould cooling water shunt

    9.Neutron device standard interface

    10.Automatic centralized lubrication system

    11.Opening/closing moulde,jection position controlled by scale

    12.Automatic mould adjustment (optional)

     图片4

    图片5

    图片6

    Professional plasticizing and injection solutions

    Balanced twin cylinder injection system

    Double guide pin linear guide bearing

    Hydraulic System
    1.The manual plug valve hydraulic system make the machine having quick and smooth motion response2.Double proportional valve control  pressure flow3.Hydraulic oil cooling device4.High-performance imported hydraulic unit with optimizing allocation5.The fuel has a big opening hole so can be cleaned easily

    图片7

    Product Feature

    JUST series models have advantages of mature technology and reliable performance that is recognized by domestic and foreign customers consistent over the years. It has high accuracy,high efficiency and high service life.

    1.Engry-saving -Patented high-response energy-saving oil circuit saves 50%-80%

    2.Fast -Rate of injection increased,Empty cycle time is shortened

    3.Precision-Choose semi-closed or fully closed loop, more precise for molding control

    4Clean-movable oil tank to ensure clean oil path

    5.Durable-High-performance clamping structure, mold will not deformed

    6.Stable-Optimized design of mechanical, oil circuit, electrical control closely matched, can be combined with high-efficiency cooler, forming more stable

    7.Modularity-Modularization of mechanism, oil circuit and wiring, combined with multiple injection systems to meet different production process requirements

    Configuration Table

    Machine model:JUST3280PET

    Grade configuration

    F6

    Controller

    TaiwanTechmation

    Thermal  OverloadRelay

    Schneider  Fuji

    Linear  teansducer

    Import

    LimitSwitches

    Omron

    Vane  Pump

    Vickers  VICKS

    Directional Valve

    Vickers

    Proportional Valve

    Dofluid  HNC

    Five-star Hydraulic Motor

    Intermot

    Orbital Hydraulic Motor

    Eaton  JiNing

    Lubrication Pump

    Automatic

    Airproofpiece

    Imported

    Contactor

    Schneider  Fuji

    Air Breaker

    Schneider  Fuji

    TOP