Our company sticks to the principle of "Quality is the life of the company, and reputation is the soul of it" for Free sample for Nylon Fish Tape to Canberra Importers, We warmly welcome you to establish cooperation and create a bright future together with us
Nylon Fish Tape
|Product:||Nylon Fish Tape|
|Wire: 100% New Nylon|
|Thickness:||3.0mm, 4.0mm, 4.5mm|
|Length:||5m, 10m, 15m, 20m, 25m, 30m, or nominated length|
|Usage:||Pull the wire through the wall or tube, save time and labor, easy and long lasting.|
The traditional range of Judin Nylon fish tapes, from high quality Nylon in ø3mm, ø4mm and ø4.5mm with fixed and interchangeable terminals.
Excellent for building installations. Complete range of accessories and complementary products for better and easier usage of the fish tape.
Fish tape or wire-puller has been designed to put an electric wire into a conduit easily and is a tool that, if a electrical worker pushes the wire-puller into the conduit and connects the wire
with the front terminal hole of the wire-puller coming out of the other side of the conduit before pulling the wire-puller, makes the wire pass rough the inside of the conduit.
1. The work ability of our product is excellent.
2. The product is also available to the work inserting a wire into a crooked place due to high bending elasticity.
3. The product uses non-conductive plastic materials, so there is no risk of electric shock.
4. The product can be used for an extended period of time
5. It does not get rusty and corrode.
6.It shortens working time remarkably in the street with many curves and long distance.
7. The price is cheap when compared with the quality.
Other Fish Tapes
Should you need any product or have any question, please do not be hesitate to contact with us.
Shipment: All goods can be delivered by Sea and By air or according to your request. Loading Port: Ningbo or Shanghai, China
Payment terms: TT: 30% deposit and left pay after receive the copy of BL within 7 days
Sample lead time: about 1-2 days Mass production lead time: about 25 days after getting the deposit
Here is what we use to thaw the rabbit bottles in our barn where we keep the rabbits. The low was 2 degrees last night.
Winter is a tough time to breed and raise rabbits but with a few simple tricks it can be quite painless for all involved. Here is one way to water rabbits that will assure they have water a good part of the day and night. Rabbits do not need to have access to water at all times but the more water they drink the more they will eat and the more likely they are to reach their full potential.
We switch water bottles out two to three times a day depending on how cold it is and how fst they freeze. The trick is to have at least twice as many water bottles as you have holes (cage sections). Plus a few more in case one gets damaged. Plug in your brooder hood with a plastic Y that will allow you to use two 60 watt bulbs during the coldest times. Even when it is not as cold we have found that it is better to have two 40 watt bulbs in case one fails the other will keep the chill off the inside of the can. Fasten the brooder hood to the handle of the can with a wire. Then turn the lid upside down with the handle down and the light dangling and place the lid on can. I would like to find a ceramic Y instead of the plastic but so far no problem especially when it’s cold.
Then just leave it on and maintain to regulate so your not heating it up too much. Fill all bottles with water, give each hole a bottle and put the other bottles into the can. This can is wrapped with insulation that has a vinyl backing like for pole barns. But you can use any plastic or a thick garbage bag. I fastened it with gorilla tape (in my opinion it’s better than duct tape). Also when it is really cold fill water bottles half full for the holes that have only one rabbit. The holes that contain a dam with litter or a grow out pen should have bottles filled completely as they are likely to drink most of it before it freezes. A single rabbit might only drink a small amount and when full bottles freeze they could be damaged plus it is more to thaw out. The first thing that will freeze are the tips and sometimes you can change only the tips but it is always better to change the entire bottle. Water will push out of the bottles as they thaw and will end up in the bottom of the can. Because the water in the bottom gets pretty warm at times the water needs to be dumped and the can cleaned with bleach now and then. Depending on how many rabbits you have it might be worth it to have three times as many bottles as you have holes. You could drill a hole thru the lid and plae lid on correctly but this way gives you ventilation and when you pull the lid off and tun it over it sets flat with the light facing up. Anyway, I hope this helps somebody out there that might be interested in raising rabbits in the winter.
In this video I teach you how to use an inline spark tester. This is a very simple process, anyone can do it, and it makes small engine diagnosis a breeze.