Hot New Products Bending Spring to Indonesia Manufacturer

We insist on offering high quality production with good business concept, honest sales and the best and fast service. it will bring you not only the high quality product and huge profit, but the most significant is to occupy the endless market for Hot New Products Bending Spring to Indonesia Manufacturer, Welcome any inquiry to our company. We will be glad to establish friendly business relationships with you!

Bending Spring


Product Bending Spring
Material Spring Steel Wire
Thickness: 16-32mm ;1/2″ 3/4″ 1″ 1-1/4″ ,According to required
Length 400mm 450mm 500mm
Application: Used for the prevention of wall collapse on PVC conduits during bending


Product Description

Detail Photos

Bending spring  (1) Bending spring  (1)


Other Fish Tapes

fish tape

  • Previous:
  • Next:
    • Others

      Should you need any product or have any question, please do not be hesitate to contact with us.

    • Shipping

      Shipment: All goods can be delivered by Sea and By air or according to your request. Loading Port: Ningbo or Shanghai, China

    • Payment Terms

      Payment terms: TT: 30% deposit and left pay after receive the copy of BL within 7 days

    • Delivery Time

      Sample lead time: about 1-2 days Mass production lead time: about 25 days after getting the deposit

  • Recently we had the chance to check out a Twister T4 Trimmer equipped with a DRY tumbler – a brand new product from the manufacturers of the T4 and T2.

    The testing set-up was as follows: two Twister T4 Trimmers were linked in tandem, with a Twister feed conveyor feeding the unprocessed cannabis into the first tumbler, and a second quality control conveyor leading out of the machine to the storage bags. The machines were linked to vacuums outfitted with 70 micron filter bags to catch all the trim. The entire operation was composed of only three people – the machine operator and two quality control experts. Room temperature was strictly controlled at 68 degrees Fahrenheit (20C) at 55% RH. The only prep work to the plants was to pull off the fan leaves from the base of the stalk, and the drying process itself.

    As for the dried cannabis, various moisture contents were tested ranging from 11% to 15%. Moisture levels lower than 12% were too dry, and the end product suffered. Trimming performed best at a range of 12% to 14% moisture content.

    The machines were run continuously for one full work day (8 hours) with no breaks, and no maintenance. The machines were able to process 16lbs per hour for a total of 128lbs over the course of the entire day; contrast this to standard hand trimming rates of .5lb to 1lb per day. Subsequent lab testing of the trimmed product showed THC levels between -1% to +2% compared to hand trimming. Cooler temperatures at similar humidity may have produced superior results, but at 68 degrees the finished product was still satisfactory.

    For more info visit