Hot New Products Bending Spring to Latvia Factory

We are commitment to offer the competitive price ,outstanding products quality, as well as fast delivery for Hot New Products Bending Spring to Latvia Factory, Adhering to the business principle of mutual benefits, we have won good reputation among our customers because of our perfect services, quality products and competitive prices. We warmly welcome customers from home and abroad to cooperate with us for common success.


Bending Spring

 

Product Bending Spring
Material Spring Steel Wire
Thickness: 16-32mm ;1/2″ 3/4″ 1″ 1-1/4″ ,According to required
Length 400mm 450mm 500mm
Application: Used for the prevention of wall collapse on PVC conduits during bending

 

Product Description

Detail Photos

Bending spring  (1) Bending spring  (1)

 

Other Fish Tapes

fish tape

  • Previous:
  • Next:
    • Others

      Should you need any product or have any question, please do not be hesitate to contact with us.

    • Shipping

      Shipment: All goods can be delivered by Sea and By air or according to your request. Loading Port: Ningbo or Shanghai, China

    • Payment Terms

      Payment terms: TT: 30% deposit and left pay after receive the copy of BL within 7 days

    • Delivery Time

      Sample lead time: about 1-2 days Mass production lead time: about 25 days after getting the deposit





  • This video describes, in detail, how to construct a Current Limiting Device to protect you, your test equipment, and any electronic gear that you are testing or repairing. When used properly, it prevents short circuits from causing additional damage, particularly to expensive power transformers in amplifiers. It is also quite useful when first powering up previously untested and vintage equipment. It is not suitable for use with medium to large electric motors.

    The bulb functions as a high-wattage resistor in which the resistance increases with the increasing heat of the filament. A “cold” bulb may offer only 2 or 3 ohms of resistance (the higher the wattage, the lower the resistance), but this will rapidly rise as the filament heats, particularly in the case of a short circuit…..protecting the circuit and dissipating the resulting filament heat in the form of light (warning you of the existence of the short).

    IMPORTANT NOTE: The wattage of the bulb must be tailored to the current draw of the device being protected. The high-wattage bulbs (200W+) recommended in the video are primarily for Tube Amplifiers, which operate at relatively high current levels. With lower-current devices, such as Solid State amps, a lower wattage-higher resistance bulb (even as low as 40W) may be required for circuit protection.

    For viewers in areas with 220-240VAC power: Although your voltage is double (220VAC vs 110VAC), your current flow is about half. Since the Current Limiter (CL) depends on current to rapidly heat the filament and increase its resistance, you need a bulb with higher filament resistance. Since the filament resistance of the bulb decreases with higher wattage, you should try a lower wattage, higher resistance bulb…..i.e. a 100W……initially, and then fine tune the wattage depending upon the power demands of the amplifier being protected.

    The Photoflood Bulb used in this video is available on Amazon. Here is a link: http://www.amazon.com/Eiko-Supreme-Photoflood-Light-Bulb/dp/B000TZQUF0

    If you enjoy seeing videos featuring classic vintage jukeboxes and guitar amplifiers, please consider subscribing to my channel, to gain easy access to over 100 related videos and to be notified when new videos are posted. Thanks for watching !!!

    TOP