Reliable Supplier Fencing Wire for Belgium Manufacturer

We aim to find out quality disfigurement from the production and supply the best service to domestic and overseas customers wholeheartedly for Reliable Supplier Fencing Wire for Belgium Manufacturer, we are seeking for extensive cooperation with honest customers, achieving a new cause of glory with customers and strategic partners.


Judin Polyester Wire Introduction

  70112161641

Judin Wire:

Judin wires are specially designed monofilaments to substitute the use of conventional steel cables and wire for farming, agriculture, vineyards, orchards, culture under cover, wind breakers, green houses ( shading and roofing), safe fences for animal husbandry, cover for dams and ponds, marine cultures and variety of other applications.

Judin wires are produce with Nylon and Polyester and the advantages they offer are listed below. One would choose between the 2 based on the area of usage. Most of the advantages these lines offer over the conventional metal cables are the same with a few significant differences making them the preferred choices for certain applications.

  • Judin wires are lighter than steel cables making handling much easier than steel cables resulting in a much easier and faster installation than steel cables.
  • Once the Judin wire is properly tensioned it requires no maintenance and does not sag further because of the low stretch factor of PET.
  • Judin wires are highly U.V and weather stabilized. The wire does not degrade from exposure to sunlight and requires no maintenance in even extreme weather conditions.
  •  One of the many advantages of the line is its stability against extreme temperatures which prevents melting and damage to the plastic film covering used in greenhouses to prevent frost damage to plants.
  • Judin wire does not rust and are non corrosive. The Judin wire exhibits good resistance to chemicals and fertilizers and hence lasts longer.
  • Judin wire does not damage plants, animals or the environment.
  • One of the other advantages of using this wire is that it does not conduct electricity or currents making it a safe alternative in case of lightening.
  •  PET Judin wire exhibits lower elongation and lower water, humidity or moisture absorption making it the preferred wire for many applications.

 

Product Advantage 

EASY INSTALLATION;
EASY TO HANDLE;
LESS MAINTENANCE;
MANIPULATION OF FOLIAGE;
LESS CLIPS OR STAPLES;
SUITABLE FOR USE WITH NEW TECHNOLOGY;
NO CORROSION;
EASY TO REPAIR;
NEUTRAL TO TEMP;
Judin WIRE SPECIFICATION;

DIAMETER

COLOUR

LOAD

ELONGATION

METERAGE

mm

 

Kgs

IN %

Mtrs/ KG

2.20

BLACK

160

17

190

2.20

TRANSPARENT

160

17

190

2.50

BLACK

200

17

145

2.50

TRANSPARENT

200

17

145

3.00

BLACK

300

17

100

3.50

BLACK

385

17

75

4.00

BLACK

480

17

55

Please show us your requirement.

  • Previous:
  • Next:
    • Others

      Should you need any product or have any question, please do not be hesitate to contact with us.

    • Shipping

      Shipment: All goods can be delivered by Sea and By air or according to your request. Loading Port: Ningbo or Shanghai, China

    • Payment Terms

      Payment terms: TT: 30% deposit and left pay after receive the copy of BL within 7 days

    • Delivery Time

      Sample lead time: about 1-2 days Mass production lead time: about 25 days after getting the deposit




  • http://www.oxo.com/p-336-grout-brush.aspx

    Tackle your bathroom’s tough grout lines and tight spaces with the OXO Good Grips Grout Brush. Featuring narrow rows of sturdy bristles, the Brush eliminates grime from tile grout, around bath fixtures, behind faucets and in sliding shower door tracks. The handle has a soft, comfortable, non-slip grip to cushion hand while scrubbing.



    In our interview series with the movers and shakers in the 3D realm, we talk to Carl Bass the CEO of Autodesk and how he is turning Autodesk into a 3D design, scan and print company for the masses.

    Links:

    http://www.autodesk.com

    http://www.123dapp.com/

    http://fusion360.autodesk.com

    http://au.autodesk.com/au-online/overview?utm_source=dotcom&utm_medium=homepage-module&utm_campaign=au-online

    http://spark.autodesk.com/

    http://www.instructables.com/

    Interview questions:

    What is your name, what is your profession and where do you reside?

    What is “Flying Moose Systems” and how did this help you become part of Autodesk?

    When did you become CEO of Autodesk?

    Like other CEOs in high profile companies in the tech industry, you have have engineering background. Do you feel that this is important trait in running a technology company?

    How large is Autodesk now, and how many divisions are now part of Autodesk?

    Wired magazine did an interview with you and it caught my attention due to your own “Maker” background, and how this thought process seems to have permeated throughout Autodesk. In your own words, how do you feel your own maker spirit has pushed Autodesk into the minds of makers, hobbyist, artist, and entrepreneurs?

    I am quite familiar with your Autocad line of products as well as Revit and 3D Studio in the ten years I worked as an IT director for a local multi-discipline firm in the early 2000s, but these tools were high powered and expensive. Autodesk still offers these tools but there are now a number of smaller, yet powerful tools that are free? Why this free or lower cost direction?

    Many in the industry see Autodesk as a large whale swallowing whole, many smaller companies and limiting innovation. Do you agree with this? If not, can you give me an example like with the acquisition of Mudbox, or recently TinkerCAD on how you are taking these products to a better level?

    What is the goal of the 123D line of software, the SPARKS initiative and Fusion 360?

    Autodesk has always supported the educational market, but many people do not know to what extent. My personal experience in going back to school for some iOS development education, I took advantage of your student software program a couple of years back and you offer all of the applications to the student for a period of three years for at total out-of-pocket cost of $100 (ed. Now Free!). This is fantastic oppurtunity to reach out with your programs and allowed me to try out a number of solid modeling applications like Inventor before settling on the Fusion 360 because of Inventor feel, but a trimmer set of features more to my needs for the development of my new NEODiMOUNT and 4eyes accessories for the Occipital Structure Sensor. I think this sets you apart from Dassault who pushes crippled versions into the schools and then provides no low cost way of continuing to use their product (that I know of).

    Where is Autodesk heading in 2015 and beyond? Do you see a line of hardware devices like the Ember? Or was this experiment?

    TOP